注册 登录  
 加关注
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

欢迎光临我的博客

 
 
 

日志

 
 

v240 正常启动时串口信息  

2009-01-14 19:37:01|  分类: unix |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |

在新的v240主板,两个cpu及其风扇,没有光纤卡和显卡,没有鼠标,和键盘的情况下串口输出信息如下:
ALOM BOOTMON v1.3.0
ALOM Build Release: 007
Reset register: e0000000 EHRS ESRS LLRS

ALOM POST 1.0

Dual Port Memory Test, PASSED.

TTY External -
TTY External - Internal Loopback Test, PASSED.

TTYC - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.

Memory Data Lines Test
Memory Data Lines Test, PASSED.

Memory Address Lines Test
  Slide address bits to test open address lines

  Test for shorted address lines

Memory Address Lines Test, PASSED.

Memory Parity Test
Memory Parity Test, PASSED.

Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.


Return to Boot Monitor for Handshake 
ALOM POST 1.0
   Status = 00007fff

Returned from Boot Monitor and Handshake

Clearing Memory Cells
Memory Clean Complete


Loading the runtime image...
SC Alert: SC System booted.

SC Alert: Host System has Reset


Sun(tm) Advanced Lights Out Manager 1.3 (V250)


Full VxDiag Tests


BASIC TOD TEST

  Read the TOD Clock:        SAT JAN 01 00:12:09 2000

  Wait, 1 - 3 seconds       

  Read the TOD Clock:        SAT JAN 01 00:12:11 2000

BASIC TOD TEST, PASSED


ETHERNET CPU LOOPBACK TEST

  50 BYTE PACKET   - a 0 in field of 1's.  Attaching network interface cpm0... done.


  50 BYTE PACKET   - a 1 in field of 0's. 

  900 BYTE PACKET  - pseudo-random data. 

ETHERNET CPU LOOPBACK TEST, PASSED


Full VxDiag Tests - PASSED


    Status summary  -  Status = 7FFF


       VxDiag    -          -  PASSED

       POST      -          -  PASSED

       LOOPBACK  -          -  PASSED


       I2C       -          -  PASSED

       EPROM     -          -  PASSED

       FRU PROM  -          -  PASSED


       ETHERNET  -          -  PASSED

       MAIN CRC  -          -  PASSED

       BOOT CRC  -          -  PASSED


       TTYD      -          -  PASSED

       TTYC      -          -  PASSED

       MEMORY    -          -  PASSED

       MPC850    -          -  PASSED


Enter #. to return to ALOM.
0>Set Timing

0> UltraSPARC[TM] IIIi, Version 2.4

1>L2 Cache Tags Test

1>Init CPU

1> UltraSPARC[TM] IIIi, Version 2.4

1>DMMU

1>DMMU TLB DATA RAM Access

1>DMMU TLB TAGS Access

1>IMMU Registers Access

1>IMMU TLB DATA RAM Access

1>IMMU TLB TAGS Access

1>Init mmu regs

1>Setup L2 Cache

1>L2 Cache Control = 00000000.00f04400

1> Size = 00000000.00100000...

1>Scrub and Setup L2 Cache

1>Setup and Enable DMMU

1>Setup DMMU Miss Handler

1>Test and Init Temp Mailbox

1>CPU Tick and Tick Compare Registers Test

1>CPU Stick and Stick Compare Registers Test

1>Setup Int Handlers

0>Setup Int Handlers

0>Send Int CPU 1

1>Send Int to Master CPU

0>Initialize I2C Controller

0>MB: Part-Dash-Rev#:  3753150-04-0G Serial#:  089944

0>CPU0 MB/P0/B0/D0:

0>Part#:  36VDDT12872G-26AC0  Serial#:  072ac35b  Date Code:  0425  Rev#:  0000

0>CPU0 MB/P0/B0/D1:

0>Part#:  36VDDT12872G-26AC0  Serial#:  072ac37e  Date Code:  0425  Rev#:  0000

0>CPU1 MB/P1/B0/D0:

0>Part#:  36VDDT12872G-26AC0  Serial#:  072ac3bc  Date Code:  0425  Rev#:  0000

0>CPU1 MB/P1/B0/D1:

0>Part#:  36VDDT12872G-26AC0  Serial#:  072ac381  Date Code:  0425  Rev#:  0000

0>Set CPU/System Speed

0>Jumper data = 3c

0>..

0>Send MC Timing CPU 1

0>Probe Dimms

1>Probe Dimms

1>Init Mem Controller Regs

0>Init Mem Controller Regs

1>Set JBUS config reg

0>Set JBUS config reg

0>IO-Bridge unit 0 init test            

0>IO-Bridge unit 1 init test            

0>Do PLL reset

0>Setting timing to 8:1 10:1, system frequency 160 MHz, CPU frequency 1280 MHz

0>Soft Power-on RST thru SW

0>CPUs present in system: 0 1

0>

0>Resume selftest...

0>Init SB

0>Init CPU

0>Init mmu regs

0>Setup L2 Cache

0>L2 Cache Control = 00000000.00f04400

0> Size = 00000000.00100000...

0>Setup and Enable DMMU

0>Setup DMMU Miss Handler

0>Timing is 8:1 10:1, sys 159 MHz, CPU 1279 MHz, mem 127 MHz.

0> UltraSPARC[TM] IIIi, Version 2.4

1>Init CPU

1> UltraSPARC[TM] IIIi, Version 2.4

1>Init mmu regs

1>Setup L2 Cache

1>L2 Cache Control = 00000000.00f04400

1> Size = 00000000.00100000...

1>Setup and Enable DMMU

1>Setup DMMU Miss Handler

1>Timing is 8:1 10:1, sys 159 MHz, CPU 1279 MHz, mem 127 MHz.

0>Initialize I2C Controller

1>Init Mem Controller Sequence

0>Init Mem Controller Sequence

0>IO-Bridge unit 0 init test            

0>IO-Bridge unit 1 init test            

0>Select Bank Config

0>Probe and Setup Memory

0>INFO: 1024MB Bank 0, Dimm Type X4

0>INFO: 1024MB Bank 1, Dimm Type X4

0>INFO: No memory detected in Bank 2

0>INFO: No memory detected in Bank 3

0>

0>Data Bitwalk on Master

0> Test Bank 0.

0> Test Bank 1.

0>Address Bitwalk on Master

0>INFO: Addr walk mem test on CPU 0 Bank 0: 00000000.00000000 to 00000000.40000000.

0>INFO: Addr walk mem test on CPU 0 Bank 1: 00000001.00000000 to 00000001.40000000.

0>Set Mailbox

0>Final mc1 is 50000006.3e581c4e.

0>Setup Final DMMU Entries

0>Post Image Region Scrub

0>Run POST from Memory

0>Verifying checksum on copied image.

0>The Memory's CHECKSUM value is 1e09.

0>The Memory's Content Size value is 5c60.

0>Success...  Checksum on Memory Validated.

1>Select Bank Config

1>Probe and Setup Memory

1>INFO: 1024MB Bank 0, Dimm Type X4

1>INFO: 1024MB Bank 1, Dimm Type X4

1>INFO: No memory detected in Bank 2

1>INFO: No memory detected in Bank 3

1>

1>Set Mailbox

1>Final mc1 is 50000006.3e581c4e.

0>Data Bitwalk on Slave 1

0> Test Bank 0.

0> Test Bank 1.

0>Address Bitwalk on Slave 1

0>INFO: Addr walk mem test on CPU 1 Bank 0: 00000010.00000000 to 00000010.40000000.

0>INFO: Addr walk mem test on CPU 1 Bank 1: 00000011.00000000 to 00000011.40000000.

1>Setup Final DMMU Entries

1>Map Slave POST to master memory

1>I-Cache RAM Test

0>I-Cache RAM Test

1>I-Cache Tag RAM

0>I-Cache Tag RAM

1>I-Cache Valid/Predict TAGS Test

0>I-Cache Valid/Predict TAGS Test

1>I-Cache Snoop Tag Field

0>I-Cache Snoop Tag Field

1>I-Cache Branch Predict Array Test

0>I-Cache Branch Predict Array Test

1>Branch Prediction Initialization

0>Branch Prediction Initialization

1>D-Cache RAM

0>D-Cache RAM

1>D-Cache Tags

0>D-Cache Tags

1>D-Cache Micro Tags

0>D-Cache Micro Tags

1>D-Cache SnoopTags Test

0>D-Cache SnoopTags Test

1>W-Cache RAM

0>W-Cache RAM

1>W-Cache Tags

0>W-Cache Tags

1>W-Cache Valid bit Test

0>W-Cache Valid bit Test

1>W-Cache Bank valid bit Test

0>W-Cache Bank valid bit Test

1>W-Cache SnoopTAGS Test

0>W-Cache SnoopTAGS Test

1>P-Cache RAM

0>P-Cache RAM

1>P-Cache Tags

0>P-Cache Tags

1>P-Cache SnoopTags Test

0>P-Cache SnoopTags Test

1>P-Cache Status Data Test

0>P-Cache Status Data Test

1>8k DMMU TLB 0 Data

0>8k DMMU TLB 0 Data

1>8k DMMU TLB 1 Data

0>8k DMMU TLB 1 Data

1>8k DMMU TLB 0 Tags

0>8k DMMU TLB 0 Tags

1>8k DMMU TLB 1 Tags

0>8k DMMU TLB 1 Tags

1>8k IMMU TLB Data

0>8k IMMU TLB Data

1>8k IMMU TLB Tags

0>8k IMMU TLB Tags

1>FPU Registers and Data Path

0>FPU Registers and Data Path

1>FPU Move Registers

0>FPU Move Registers

1>FSR Read/Write

0>FSR Read/Write

1>FPU Block Register Test

0>FPU Block Register Test

1>FPU Branch Instructions

0>FPU Branch Instructions

1>FPU Functional Test

0>FPU Functional Test

1>Scrub Memory

0>Scrub Memory

1>Flush Caches

0>Flush Caches

1>L2-Cache Functional

0>L2-Cache Functional

1>L2-Cache Stress

0>L2-Cache Stress

1>IMMU Functional

0>IMMU Functional

1>DMMU Functional

0>DMMU Functional

1>I-Cache Functional

0>I-Cache Functional

1>I-Cache Parity Functional

0>I-Cache Parity Functional

1>I-Cache Parity Tag

0>I-Cache Parity Tag

1>I-Cache Snoop Parity Tag

0>I-Cache Snoop Parity Tag

1>D-Cache Functional

0>D-Cache Functional

1>D-Cache Parity Functional

0>D-Cache Parity Functional

1>D-Cache Parity Tag Test

0>D-Cache Parity Tag Test

1>W-Cache Functional

0>W-Cache Functional

1>Graphics Functional

1>CPU Superscalar Dispatch

0>Graphics Functional

0>CPU Superscalar Dispatch

1>SPARC Atomic Instruction Test

0>SPARC Atomic Instruction Test

1>Non SPARC Atomic Instruction Test

0>Non SPARC Atomic Instruction Test

1>SOFTINT Register and Interrupt Test

1>Branch Memory Test

0>SOFTINT Register and Interrupt Test

0>Branch Memory Test

1>Fast ECC test

0>Fast ECC test

1>System ECC test

0>System ECC test

0>XBus SRAM

0>IO-Bridge SouthBridge Remap Devs      

0>JBUS quick check

0>  to IO-bridge_0

0>  to IO-bridge_1

0>IO-Bridge unit 0 sram      test  

0>IO-Bridge unit 0 reg       test  

0>IO-Bridge unit 0 mem       test  

0>IO-Bridge unit 0 PCI id    test  

0>IO-Bridge unit 0 interrupt test  

0>IO-Bridge unit 1 sram      test  

0>IO-Bridge unit 1 reg       test  

0>IO-Bridge unit 1 mem       test  

0>IO-Bridge unit 1 PCI id    test  

0>IO-Bridge unit 1 interrupt test  

0>IO-Bridge unit 0 init      test  

1>IO-Bridge unit 0 sram      test  

1>IO-Bridge unit 0 reg       test  

1>IO-Bridge unit 0 mem       test  

1>IO-Bridge unit 0 PCI id    test  

1>IO-Bridge unit 0 interrupt test  

1>IO-Bridge unit 1 init      test  

1>IO-Bridge unit 1 sram      test  

1>IO-Bridge unit 1 reg       test  

1>IO-Bridge unit 1 mem       test  

1>IO-Bridge unit 1 PCI id    test  

1>IO-Bridge unit 1 interrupt test  

1>Print Mem Config

1>Caches : Icache is ON, Dcache is ON, Wcache is ON, Pcache is ON.

1>Memory interleave set to 0

1> Bank 0 1024MB : 00000010.00000000 -> 00000010.40000000.

1> Bank 1 1024MB : 00000011.00000000 -> 00000011.40000000.

0>Print Mem Config

0>Caches : Icache is ON, Dcache is ON, Wcache is ON, Pcache is ON.

0>Memory interleave set to 0

0> Bank 0 1024MB : 00000000.00000000 -> 00000000.40000000.

0> Bank 1 1024MB : 00000001.00000000 -> 00000001.40000000.

1>Block Memory

0>Block Memory

1>Test 1069547520 bytes on bank 0....

0>Test 1063256064 bytes on bank 0....

0>0% Done...

0>1% Done...

0>3% Done...

0>4% Done...

0>6% Done...

0>7% Done...

0>9% Done...

0>10% Done...

0>11% Done...

0>13% Done...

0>14% Done...

0>16% Done...

0>17% Done...

0>18% Done...

0>20% Done...

0>21% Done...

0>23% Done...

0>24% Done...

0>25% Done...

0>27% Done...

0>28% Done...

0>30% Done...

0>31% Done...

0>32% Done...

0>34% Done...

0>35% Done...

0>37% Done...

0>38% Done...

0>39% Done...

0>41% Done...

0>42% Done...

0>44% Done...

0>45% Done...

0>46% Done...

0>48% Done...

0>49% Done...

0>51% Done...

0>52% Done...

0>53% Done...

0>55% Done...

0>56% Done...

0>58% Done...

0>59% Done...

0>60% Done...

0>62% Done...

0>63% Done...

0>65% Done...

0>66% Done...

0>67% Done...

0>69% Done...

0>70% Done...

0>72% Done...

0>73% Done...

0>74% Done...

0>76% Done...

0>77% Done...

0>79% Done...

0>80% Done...

0>81% Done...

0>83% Done...

0>84% Done...

0>86% Done...

0>87% Done...

0>88% Done...

0>90% Done...

1>Test 1073741824 bytes on bank 1....

0>91% Done...

0>93% Done...

0>94% Done...

0>95% Done...

0>97% Done...

0>98% Done...

0>Test 1073741824 bytes on bank 1....

0>0% Done...

0>2% Done...

0>3% Done...

0>4% Done...

0>6% Done...

0>7% Done...

0>9% Done...

0>10% Done...

0>11% Done...

0>13% Done...

0>14% Done...

0>15% Done...

0>17% Done...

0>18% Done...

0>20% Done...

0>21% Done...

0>22% Done...

0>24% Done...

0>25% Done...

0>27% Done...

0>28% Done...

0>29% Done...

0>31% Done...

0>32% Done...

0>34% Done...

0>35% Done...

0>36% Done...

0>38% Done...

0>39% Done...

0>40% Done...

0>42% Done...

0>43% Done...

0>45% Done...

0>46% Done...

0>47% Done...

0>49% Done...

0>50% Done...

0>52% Done...

0>53% Done...

0>54% Done...

0>56% Done...

0>57% Done...

0>59% Done...

0>60% Done...

0>61% Done...

0>63% Done...

0>64% Done...

0>65% Done...

0>67% Done...

0>68% Done...

0>70% Done...

0>71% Done...

0>72% Done...

0>74% Done...

0>75% Done...

0>77% Done...

0>78% Done...

0>79% Done...

0>81% Done...

0>82% Done...

0>84% Done...

0>85% Done...

0>86% Done...

0>88% Done...

0>89% Done...

0>90% Done...

0>92% Done...

0>93% Done...

0>95% Done...

0>96% Done...

0>97% Done...

0>99% Done...

0>INFO:

0> POST Passed all devices.

0>

0>POST: Return to OBP.

SC Alert: Host System has Reset

Keyswitch set to diagnostic position.
@(#)OBP 4.11.4 2003/07/23 08:04 Sun Fire V210/V240,Netra 240
Clearing TLBs
POST Results: Cpu 0000.0000.0000.0000
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.28c3 %o2 = ffff.ffff.ffff.ffff
POST Results: Cpu 0000.0000.0000.0001
  %o0 = 0000.0000.0000.0000 %o1 = ffff.ffff.f00a.28c3 %o2 = ffff.ffff.ffff.ffff
Membase: 0000.0000.0000.0000
MemSize: 0000.0000.0004.0000
Init CPU arrays Done
Init E$ tags Done
Setup TLB (small-footprint mode) Done
MMUs ON
Scrubbing Tomatillo tags... 0 1
Dropin checksum: OK
Find dropin, Copying Done, Size 0000.0000.0000.5c60
PC = 0000.07ff.f000.4c84
PC = 0000.0000.0000.4cf8
Dropin checksum: OK
Find dropin, Copying Done, Size 0000.0000.0001.0ef0
ttya initialized
Programming IMAX
GPIO config is 3

CPU 0 Speed: 1280 Mhz, ratio  8:1 , ECCR: f00c00
CPU 1 Speed: 1280 Mhz, ratio  8:1 , ECCR: f00c00
CPU 0 Memory Configuration: Valid
CPU 1 Memory Configuration: Valid
CPU 0 Bank 0 1024 MB Bank 1 1024 MB Bank 2 <empty> Bank 3 <empty>
CPU 1 Bank 0 1024 MB Bank 1 1024 MB Bank 2 <empty> Bank 3 <empty>
Master CPU 1 Membase: 1100000000 Memsize: 40000000


Keyswitch set to diagnostic position.
@(#)OBP 4.11.4 2003/07/23 08:04 Sun Fire V210/V240,Netra 240
Clearing TLBs
Loading Configuration
Membase: 0000.0011.0000.0000
MemSize: 0000.0000.4000.0000
Init CPU arrays Done
Init E$ tags Done
Setup TLB Done
MMUs ON
Scrubbing Tomatillo tags... 0 1
Block Scrubbing Done
Dropin checksum: OK
Find dropin, Copying Done, Size 0000.0000.0000.5c60
PC = 0000.07ff.f000.4c84
PC = 0000.0000.0000.4cf8
Dropin checksum: OK
Find dropin, (copied), Decompressing Done, Size 0000.0000.0006.46e0
ttya initialized
System Reset: CPU Reset (SPOR)
JBUS-PCI bridge
JBUS-PCI bridge
Probing jbus at 0,0 SUNW,UltraSPARC-IIIi (1280 MHz @ 8:1, 1 MB)
   memory-controller
Probing jbus at 1,0 SUNW,UltraSPARC-IIIi (1280 MHz @ 8:1, 1 MB)
   memory-controller
Probing jbus at 1f,0 pci
Probing jbus at 1e,0 pci
Probing jbus at 1c,0 pci
Probing jbus at 1d,0 pci
Loading Support Packages: kbd-translator obp-tftp SUNW,i2c-ram-device
   SUNW,fru-device SUNW,asr
Loading onboard drivers:
Probing /pci@1e,600000 Device 7  isa flashprom rtc i2c i2c-bridge
   i2c-bridge motherboard-fru-prom chassis-fru-prom
   power-supply-fru-prom power-supply-fru-prom dimm-spd dimm-spd
   dimm-spd dimm-spd rscrtc nvram idprom gpio gpio gpio gpio gpio gpio
   power serial serial serial rmc-comm
CPU 0 Bank 0 base          0 size 1024 MB
CPU 0 Bank 1 base  100000000 size 1024 MB
CPU 1 Bank 0 base 1000000000 size 1024 MB
CPU 1 Bank 1 base 1100000000 size 1024 MB
Probing /pci@1d,700000 Device 2  network network
Probing /pci@1f,700000 Device 2  network network
Probing /pci@1e,600000 Device 6  pmu i2c gpio
Probing /pci@1e,600000 Device a  usb
Probing /pci@1e,600000 Device d  ide disk cdrom
Probing /pci@1e,600000 Device 2  Nothing there
Probing /pci@1e,600000 Device 3  Nothing there
Probing /pci@1c,600000 Device 2  scsi disk tape scsi disk tape
Probing /pci@1c,600000 Device 1  Nothing there
Probing /pci@1d,700000 Device 1  Nothing there
Sun Fire V240, No Keyboard
Copyright 1998-2003 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.11.4, 4096 MB memory installed, Serial #62701421.
Ethernet address 0:3:ba:bc:bf:6d, Host ID: 83bcbf6d.

Initializing     1MB of memory at addr        113fdec000 -
                                                                     
Initializing    14MB of memory at addr        113f000000 -
                                                                     
Initializing  1008MB of memory at addr        1100000000 -
                                                                     
Initializing  1024MB of memory at addr        1000000000 /-
                                                                     
Initializing  1024MB of memory at addr         100000000 /-
                                                                     
Initializing  1024MB of memory at addr                 0 /-
                                                                     
Boot device: net  File and args:
Timed out waiting for Autonegotation to complete
Check cable and try again
Link Down
Retrying network initialization
Timed out waiting for Autonegotation to complete
Check cable and try again
Link Down
Retrying network initialization
Timed out waiting for Autonegotation to complete
Check cable and try again
Link Down
Retrying network initialization
Evaluating:

Can't open boot device

{1} ok boot disk0 -r
Boot device: /pci@1c,600000/scsi@2/disk@0,0  File and args: -r
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.12 00/07/17 15:48:16.
Loading: /platform/SUNW,Sun-Fire-V240/ufsboot
Loading: /platform/sun4u/ufsboot
*|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/*-
SunOS Release 5.10 Version Generic_118822-11 64-bit
Copyright 1983-2005 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
*\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-*\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-*\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\WARNING: Last shutdown is later than time on time-of-day chip; check date.
WARNING: /pci@1c,600000/scsi@2/sd@1,0 (sd10):
 Error for Command: load/start/stop         Error Level: Informational
 Requested Block: 0                         Error Block: 0
 Vendor: SEAGATE                            Serial Number: 0504BA0BV1 
 Sense Key: Soft Error
 ASC: 0x5d (drive operation marginal, service immediately (failure prediction threshold exceeded)), ASCQ: 0x0, FRU: 0x42
WARNING: /pci@1c,600000/scsi@2/sd@2,0 (sd12):
 Error for Command: load/start/stop         Error Level: Informational
 Requested Block: 0                         Error Block: 0
 Vendor: SEAGATE                            Serial Number: 0504BA0T9L 
 Sense Key: Soft Error
 ASC: 0x5d (drive operation marginal, service immediately (failure prediction threshold exceeded)), ASCQ: 0x0, FRU: 0x42
Hardware watchdog enabled
SC unretrieved msg JAN 01 00:12:09 2000 UTC [SC System booted.]
Hostname: v240
Jan  1 08:19:26 svc.startd[7]: svc:/network/http:apache2: Method "/lib/svc/method/http-apache2 start" failed with exit status 1.

Jan  1 08:19:27 svc.startd[7]: svc:/network/http:apache2: Method "/lib/svc/method/http-apache2 start" failed with exit status 1.

NOTICE: VxVM vxdmp V-5-0-34 added disk array DISKS, datype = Disk

Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11498 vxvm:vxconfigd: WARNING: Incomplete name in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 svc.startd[7]: svc:/network/http:apache2: Method "/lib/svc/method/http-apache2 start" failed with exit status 1.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

[ network/http:apache2 failed (see 'svcs -x' for details) ]
Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11500 vxvm:vxconfigd: WARNING: Incomplete serial no in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11498 vxvm:vxconfigd: WARNING: Incomplete name in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11496 vxvm:vxconfigd: WARNING: Incomplete id in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11500 vxvm:vxconfigd: WARNING: Incomplete serial no in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11498 vxvm:vxconfigd: WARNING: Incomplete name in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11496 vxvm:vxconfigd: WARNING: Incomplete id in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11500 vxvm:vxconfigd: WARNING: Incomplete serial no in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11498 vxvm:vxconfigd: WARNING: Incomplete name in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11496 vxvm:vxconfigd: WARNING: Incomplete id in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11500 vxvm:vxconfigd: WARNING: Incomplete serial no in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11498 vxvm:vxconfigd: WARNING: Incomplete name in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11496 vxvm:vxconfigd: WARNING: Incomplete id in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11500 vxvm:vxconfigd: WARNING: Incomplete serial no in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11498 vxvm:vxconfigd: WARNING: Incomplete name in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11496 vxvm:vxconfigd: WARNING: Incomplete id in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11500 vxvm:vxconfigd: WARNING: Incomplete serial no in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11498 vxvm:vxconfigd: WARNING: Incomplete name in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11496 vxvm:vxconfigd: WARNING: Incomplete id in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11500 vxvm:vxconfigd: WARNING: Incomplete serial no in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11498 vxvm:vxconfigd: WARNING: Incomplete name in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11496 vxvm:vxconfigd: WARNING: Incomplete id in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11500 vxvm:vxconfigd: WARNING: Incomplete serial no in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11498 vxvm:vxconfigd: WARNING: Incomplete name in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11496 vxvm:vxconfigd: WARNING: Incomplete id in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11500 vxvm:vxconfigd: WARNING: Incomplete serial no in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11498 vxvm:vxconfigd: WARNING: Incomplete name in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11496 vxvm:vxconfigd: WARNING: Incomplete id in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11500 vxvm:vxconfigd: WARNING: Incomplete serial no in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11498 vxvm:vxconfigd: WARNING: Incomplete name in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11497 vxvm:vxconfigd: WARNING: Incomplete mode in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Jan  1 08:19:27 vxvm:vxconfigd: V-5-1-11496 vxvm:vxconfigd: WARNING: Incomplete id in file /etc/vx/array.info.

Jan  1 08:19:27 vxvm:vxconfigd:           Attributes will be set to default values for these records.

Jan  1 08:19:27 vxvm:vxconfigd:
Configuring devices.
Jan  1 08:19:46 svc.startd[7]: svc:/network/ipfilter:default: Method "/lib/svc/method/ipfilter start" failed with exit status 96.

[ network/ipfilter:default misconfigured (see 'svcs -x' for details) ]
checking ufs filesystems
/dev/rdsk/c1t2d0s7: is logging.
/dev/rdsk/c1t1d0s7: is logging.
/dev/rdsk/c1t0d0s7: is logging.
WARNING: VxVM vxio V-5-0-181 Illegal vminor encountered
checking vxfs filesystems
WARNING: VxVM vxio V-5-0-181 Illegal vminor encountered
/dev/vx/rdsk/v240fsdg/v240vol1:file system check failure, aborting ...
fsckall failed with exit code 1.

WARNING - Unable to repair one or more filesystems.
Run fsck manually (fsck filesystem...).

WARNING: VxVM vxio V-5-0-181 Illegal vminor encountered
svc:/system/filesystem/local:default: WARNING: /sbin/mountall -l failed: exit status 1
Jan  1 08:20:09 svc.startd[7]: svc:/system/filesystem/local:default: Method "/lib/svc/method/fs-local" failed with exit status 95.

[ system/filesystem/local:default failed fatally (see 'svcs -x' for details) ]

v240 console login: root
Password:
Last login: Sat Jan  1 08:56:51 on console
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
You have new mail.
#
# init 5
# Jan  1 08:22:59 su: 'su nobody' succeeded for root on /dev/???

# svc.startd: The system is coming down.  Please wait.
svc.startd: 35 system services are now being stopped.
svc.startd: The system is down.
syncing file systems... done

  评论这张
 
阅读(1159)| 评论(0)
推荐 转载

历史上的今天

在LOFTER的更多文章

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2017