注册 登录  
 加关注
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

欢迎光临我的博客

 
 
 

日志

 
 

use smitty updates firmware on aix  

2011-12-01 17:18:56|  分类: unix |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |
 


POWER5 information.
Using the System Management Interface Tool to mount the update CD for AIX

Use this procedure if you want to use SMIT to mount the update CD for AIX?.


If you are applying a server firmware update through AIX and receive a message regarding mounting the CD, mount: 0506-324 Cannot mount /dev/cd0 on /mnt, use this procedure to correct the problem.
At an AIX command line, type one of the following commands depending on whether you use a graphics terminal or an ASCII terminal:
If you use a graphics terminal, type the following command:
smit

If you use an ASCII terminal, type the following command:
smitty

Note: If you are unfamiliar with the System Management Interface Tool (SMIT), select Using Smit (information only) for information about how to use SMIT.
On the System Management screen, select System Storage Management (Physical and Logical Storage).
On the System Storage? Management (Physical and Logical Storage) screen, select File Systems.
On the File Systems screen, select Mount a File System.
On the Mount a File System screen, specify the following values in the entry fields, and press Enter. Do not press Enter until you specify values in all of the required fields.
Table 1. Descriptions and entry field values in the System Management Interface Tool (SMIT)
Description Entry Field
FILE SYSTEM name /dev/cd0
DIRECTORY over which to mount /mnt
TYPE of file system cdrfs
FORCE the mount? yes
REMOTE NODE containing the file system to mount Note: Leave this field blank.
Mount as a REMOVABLE file system? yes
Mount as a READ-ONLY system? yes
Disallow DEVICE access via this mount? no
Disallow execution of SUID and sgid programs in this file system? no

To exit SMIT, press F3 several times or press F10.
To verify that the CD mounted successfully, type the following at an AIX command line:
mount

If the CD mounted successfully, a line of output similar to the following is displayed along with the date and time:
/dev/cd0 /mnt cdrfs

Choose from the following options:
If the output is displayed, continue with the next step.
If the output is not displayed, repeat steps 2 through 7.
Continue with step 6 in Step 3. View and unpack the RPM file that contains the server firmware in Obtaining server firmware updates through AIX or Linux without an HMC.

  评论这张
 
阅读(809)| 评论(0)
推荐 转载

历史上的今天

在LOFTER的更多文章

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2017